For measurements of up-conversion selleckchem emission intensity dependence on excitation power, a continuous-wave laser is used (980-nm radiation). Results and discussion The representative XRD pattern for the Y1.97Yb0.02Er0.01O3-doped sample is shown in Figure 1. The XRD analysis confirms the presence of a cubic bixbyite Y2O3 crystal structure with space group Ia-3 (no. 206), with diffraction peaks indexed according to the PDF card

#87-2368. No other phases were detected and the small peak shifts in respect to pure Y2O3 are observed, indicating that Er3+ and Yb3+ ions have been effectively incorporated into the host lattice. An average crystallite size in the range of 21 nm is found by Halder-Wagner method analysis of

all major diffraction peaks. Figure 1 XRD pattern of Y 1.97 Yb 0.02 Er 0.01 O 3 UCNPs. Diffraction peaks are indexed according to PDF card #87-2368 (cubic bixbyite Y2O3 crystal structure). The presence of nitrate, MI-503 cost water, and carbon species on nanoparticle surfaces is checked by Fourier transform infrared (FT-IR) spectroscopy. Only Y-O stretching vibrations of the host lattice at 560 cm−1 are noted (see Additional file 1: Figure S1 for the FT-IR spectrum of Y1.97Yb0.02Er0.01O3 sample). This is favorable for efficient emission since the high phonon energy of species adsorbed on the surface of nanoparticles may enhance significantly nonradiative de-excitation [13, 22]. The UCNPs are further investigated by transmission electron microscopy, and representative CAL-101 molecular weight images are given in Figure 2. One can see highly agglomerated crystalline nanoparticles with irregular, polygonal-like shapes having a size in the range of 30 to 50 nm with boundary lines observed clearly in some

regions (Figure 2a). Strong particle agglomeration is a main drawback of the PCS synthesis method. It is a consequence of an extremely high temperature gradient that occurs while firing metal-PEG complex. At that instance a large amount of high-pressure vapors is produced Cediranib (AZD2171) in the sample that strongly press particles onto each other. On the other hand, high-temperature gradients and pressure facilitate production of well-crystallized powder. An examination at higher magnifications (Figure 2b) reveals that grain boundaries are without any irregularities and that the surface of observed crystals is free of defects and without any amorphous layers. The spotty ring selected-area electron diffraction pattern (Figure 2c) confirms that Y2O3 powder is polycrystalline and is related to the fact that the constituent crystallites have a size of about 20 nm. Figure 2 TEM data from Y 1.97 Yb 0.02 Er 0.01 O 3 sample. (a) Bright-field image showing nanoparticle cluster. (b) [110] lattice image of a single particle. The 004 planes are indicated. Inset: FFT of image (indicated spot corresponds to 004 periodicity).